ETRI RVX Wiki

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

===== Installation - Step 2===== 
  Install the RVX git repository and set up a Python 3 environment for RVX.
  Check whether Python 3 is installed and configured properly.
  Resolve conflicts when multiple versions of Python 3 are installed.

==== 2-1 Git Repository Cloning====
=== Instruction @ Any OS===

inst) Open a terminal.
  inst) Navigate to the parent directory where you want to clone the repository.
  cmd) git clone --recursive #{Git repository URL}
  cmd) cd #{Cloned directory}
  cmd) git submodule init
  cmd) git submodule update

The target installation directory is referred to as #{RVX_MINI_HOME}.

==== 2-2 Python 3 Configuration for RVX ====
=== Objective ===

Set the python3 command used in RVX.

=== Check ===

cmd) cd #{RVX_MINI_HOME}
  cmd) make check_python

=== Instruction @ Linux===
  cmd) cd #{RVX_MINI_HOME}
  cmd) make config_python
  inst) Verify that "rvx_python_config.mh" is generated.
  inst) Open "rvx_python_config.mh" in a text editor
    * If no path is listed, Python may not be installed or there is an issue with your PATH settings.
    * If more than one path is listed, leave only the one you want to use and remove the rest.

=== Instruction @ Windows===
  cmd) cd #{RVX_MINI_HOME}
  cmd) make config_python
  inst) Verify that "rvx_python_config.mh" and "python3.bat" are generated.
  inst) Do NOT modify "rvx_python_config.mh"
  inst) Open "python3.bat" in a text editor
    * If no path is listed, Python may not be installed or there is an issue with your PATH settings.
    * If more than one path is listed, leave only the one you want to use and remove the rest.
    * Do NOT remove "%*" at the end of the line.
    * If the directory name contains spaces, enclose it in double quotation marks as shown below.
       ex) C:\Users\"Kyuseung Han"\...%*

==== 2-3 Pip3 Setup for RVX ====
=== Objective ===

Install the Python packages required for RVX

=== Check ===

cmd) make check_pip

=== Instruction @ Any OS===

cmd) make pip

If you encounter any issues, try:

cmd) make fix_pip

==== 2-4 Install ====
=== Instruction @ Linux===
  cmd) cd #{RVX_MINI_HOME}
  cmd) make install
    ⇒ Check that the file ./rvx_setup.sh has been created.
    - .bashrc에 "source #(RVX_MINI_HOME)/rvx_setup.sh"를 추가한다.
      - ⇒ # 부분은 반드시 절대 주소로 바꿔서 추가한다.
    - .bashrc을 적용하기 위해 **__명령창을 껐다 다시 켠다__**.
* [방법 Windows]
    - ${RVX_MINI_HOME}로 이동한다.
    - make install
    - PATH 환경변수에 대해
      - ⇒ 성공적으로 업데이트 되었다는 INFO가 출력된 경우는 다음으로 넘어간다.
      - ⇒ 직접 추가하라고 WARNING이 출력된 경우는
        - "${RVX_MINI_HOME}\windows_binary"를 직접 추가한다.
    - RVX_MINI_HOME 환경변수가 새로 추가되었으니 **__명령창을 껐다 다시 켠다__**.

==== Check ====
    - ${RVX_MINI_HOME}로 이동한다.
    - make check

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International