===== Installation - Step 2===== 
  Install the RVX git repository and set up a Python 3 environment for RVX.
  Check whether Python 3 is installed and configured properly.
  Resolve conflicts when multiple versions of Python 3 are installed. 

==== 2-1 Git Repository Cloning====
=== Instruction @ Any OS===

  inst) Open a terminal.
  inst) Navigate to the parent directory where you want to clone the repository.
  cmd) git clone --recursive #{Git repository URL}
  cmd) cd #{Cloned directory}
  cmd) git submodule init
  cmd) git submodule update

The target installation directory is referred to as #{RVX_MINI_HOME}.

==== 2-2 Python 3 Configuration for RVX ====
=== Objective ===

  Set the python3 command used in RVX.

=== Check ===

  cmd) cd #{RVX_MINI_HOME}
  cmd) make check_python

=== Instruction @ Linux===
  cmd) cd #{RVX_MINI_HOME}
  cmd) make config_python
  inst) Verify that "rvx_python_config.mh" is generated.
  inst) Open "rvx_python_config.mh" in a text editor
    * If no path is listed, Python may not be installed or there is an issue with your PATH settings.
    * If more than one path is listed, leave only the one you want to use and remove the rest.

=== Instruction @ Windows===
  cmd) cd #{RVX_MINI_HOME}
  cmd) make config_python
  inst) Verify that "rvx_python_config.mh" and "python3.bat" are generated.
  inst) Do NOT modify "rvx_python_config.mh"
  inst) Open "python3.bat" in a text editor
    * If no path is listed, Python may not be installed or there is an issue with your PATH settings.
    * If more than one path is listed, leave only the one you want to use and remove the rest.
    * Do NOT remove "%*" at the end of the line.
    * If the directory name contains spaces, enclose it in double quotation marks as shown below.
       ex) C:\Users\"Kyuseung Han"\...%*

==== 2-3 Pip3 Setup for RVX ====
=== Objective ===

  Install the Python packages required for RVX

=== Check ===

  cmd) make check_pip


=== Instruction @ Any OS===

  cmd) make pip

If you encounter any issues, try:

  cmd) make fix_pip

==== 2-4 Install ====
=== Instruction @ Linux===
  cmd) cd #{RVX_MINI_HOME}
  cmd) make install
    * Check that the file ./rvx_setup.sh has been created.
  inst) Add the line source #(RVX_MINI_HOME)/rvx_setup.sh to your .bashrc.
    * Be sure to replace #(RVX_MINI_HOME) with the absolute path before adding it.
  inst) To apply the changes to .bashrc, close and reopen the terminal.

=== Instruction @ Windows===
  cmd) cd #{RVX_MINI_HOME}
  cmd) make install
  inst) Update the PATH variable
    * If a message indicates that it was updated successfully, proceed to the next step.
    * If a WARNING appears, manually add "${RVX_MINI_HOME}\windows_binary" to the PATH.
  inst) To apply the changes to PATH variable, close and reopen the terminal.

==== 2-5 Check ====
=== Objective ===

  Check which installation process has issues

=== Instruction @ Any OS===
  cmd) cd #{RVX_MINI_HOME}
  cmd) make check