ETRI RVX Wiki

Install the RVX git repository and set up a Python 3 environment for RVX.
Check whether Python 3 is installed and configured properly.
Resolve conflicts when multiple versions of Python 3 are installed. 

inst) Open a terminal.
inst) Navigate to the parent directory where you want to clone the repository.
cmd) git clone --recursive #{Git repository URL}
cmd) cd #{Cloned directory}
cmd) git submodule init
cmd) git submodule update

The target installation directory is referred to as #{RVX_MINI_HOME}.

Set the python3 command used in RVX.

cmd) cd #{RVX_MINI_HOME}
cmd) make check_python

cmd) cd #{RVX_MINI_HOME}
cmd) make config_python
inst) Verify that "rvx_python_config.mh" is generated.
inst) Open "rvx_python_config.mh" in a text editor
  * If no path is listed, Python may not be installed or there is an issue with your PATH settings.
  * If more than one path is listed, leave only the one you want to use and remove the rest.

cmd) cd #{RVX_MINI_HOME}
cmd) make config_python
inst) Verify that "rvx_python_config.mh" and "python3.bat" are generated.
inst) Do NOT modify "rvx_python_config.mh"
inst) Open "python3.bat" in a text editor
  * If no path is listed, Python may not be installed or there is an issue with your PATH settings.
  * If more than one path is listed, leave only the one you want to use and remove the rest.
  * Do NOT remove "%*" at the end of the line.
  * If the directory name contains spaces, enclose it in double quotation marks as shown below.
     ex) C:\Users\"Kyuseung Han"\...%*

Install the Python packages required for RVX

cmd) make check_pip

cmd) make pip

If you encounter any issues, try:

cmd) make fix_pip

cmd) cd #{RVX_MINI_HOME}
cmd) make install
  * Check that the file ./rvx_setup.sh has been created.
inst) Add the line source #(RVX_MINI_HOME)/rvx_setup.sh to your .bashrc.
  * Be sure to replace #(RVX_MINI_HOME) with the absolute path before adding it.
inst) To apply the changes to .bashrc, close and reopen the terminal.

cmd) cd #{RVX_MINI_HOME}
cmd) make install

* [방법 Windows]

1. ${RVX_MINI_HOME}로 이동한다.
2. make install
3. PATH 환경변수에 대해
   1. ⇒ 성공적으로 업데이트 되었다는 INFO가 출력된 경우는 다음으로 넘어간다.
   2. ⇒ 직접 추가하라고 WARNING이 출력된 경우는
      1. “${RVX_MINI_HOME}\windows_binary”를 직접 추가한다.
4. RVX_MINI_HOME 환경변수가 새로 추가되었으니 명령창을 껐다 다시 켠다.

1. ${RVX_MINI_HOME}로 이동한다.
2. make check